Home / Remodeling Guides / Deck Railing Replacement
How Much Does Deck Railing Replacement Cost in Gainesville, GA?
Prices per foot for wood, composite, aluminum, cable and glass railings, what Georgia code requires, and whether your deck can keep its frame, for homeowners in Gainesville, Hall County and around Lake Lanier.
Quick answer: New deck railing in Gainesville typically costs about $30 to $70 per linear foot for pressure-treated wood, $60 to $120 for composite, $70 to $140 for black aluminum or metal balusters, $100 to $200 for cable railing, and $150 to $300 for glass, installed. Most decks have 40 to 60 feet of railing, so expect about $1,500 to $4,000 in wood and $5,000 to $12,000 in cable. EBD Construction LLC is a Gainesville, Georgia general contractor with 15+ years building decks and porches. Call Eric at 404-925-7481 for a free consultation.


What does each type of deck railing cost?
| Railing type | Installed cost per linear foot | 50 feet of railing | Upkeep |
|---|---|---|---|
| Pressure-treated wood with wood balusters | $30–$70 | $1,500–$3,500 | Stain or paint every 2–3 years |
| Wood rails with black metal balusters | $45–$90 | $2,250–$4,500 | Stain the wood |
| Composite or vinyl railing | $60–$120 | $3,000–$6,000 | Wash once a year |
| Black aluminum railing system | $70–$140 | $3,500–$7,000 | Almost none |
| Cable railing, wood or metal posts | $100–$200 | $5,000–$10,000 | Re-tension cables now and then |
| Glass panel railing | $150–$300 | $7,500–$15,000 | Clean the glass |
| Stair railing, per side | $50–$150 per foot | $400–$1,500 per run | Matches the deck |
These are general ranges for the Gainesville area, not a quote. Tear-out and hauling of old railing usually adds $300 to $1,000, and replacing rotted posts adds about $75 to $200 per post. Lake lots with long, high runs and lots of corners land toward the top of each range.
Which railing is best for a Lake Lanier or view lot?
Cable railing is the favorite on lake and mountain-view lots because thin stainless cables almost disappear when you sit down. Glass blocks even less of the view but costs more and needs cleaning. Black aluminum with thin balusters is a strong middle ground: clean-looking, nearly maintenance-free and less expensive than cable. Wood is the budget choice and fits a rustic cedar deck. See our guide to Lake Lanier decks and remodeling.
What does Georgia code require for deck railings?
- When a guard is required: any deck, porch or stair landing more than 30 inches above the ground.
- Height: at least 36 inches from the deck surface to the top of the rail.
- Openings: a 4-inch ball can't pass through anywhere, including between cables when they're pushed.
- Strength: the top rail and posts have to hold a 200-pound load, which is why posts need proper blocking or hardware, not just a couple of bolts through a notched post.
- Stairs: a graspable handrail 34 to 38 inches high on stairs with four or more risers.
Older Gainesville decks often fail on the last two points. A railing that wiggles when you lean on it is a safety problem, not just a cosmetic one.
Can new railing go on my old deck?
Usually, if the frame is sound. Eric checks the ledger, joists, beams and every railing post before pricing new rails. Rotted post bases, posts notched to half their thickness, or rusted hardware get replaced or reinforced. If the boards are worn too, it's often smart to resurface and re-rail at the same time. If the frame is failing, see our guide to whether you should repair or replace your deck.
How long does it take?
Wood, composite and aluminum railings usually take 1 to 3 days. Cable railing takes 2 to 5 days, because each post is drilled and each cable is tensioned. Cable, aluminum and glass systems can take 1 to 3 weeks to arrive, so we order as soon as you approve the design. Fall and early spring are great times to do it. See the best time to build a deck or remodel.
Do I need a permit?
Swapping old railing for new on a sound deck is often handled as a repair, but new posts, new stairs, a deck rebuild or a new deck usually need a permit in Gainesville and Hall County. Eric pulls all permits himself and builds every guard to pass inspection. See our building permits guide.
Can I see the new railing before we build it?
Yes. At the consultation Eric can show you AI mockups of your own deck with cable, aluminum or wood railing, so you can compare the look from your back door before you choose.
Where does EBD Construction work?
- Gainesville
- Flowery Branch
- Oakwood
- Buford
- Braselton
- Chestnut Mountain
- Murrayville
- Lake Lanier homes
- All of Hall County
- Towns north of Gainesville
Why hire EBD Construction?
- Deck builders, not just installers. We check and fix the posts and framing the railing depends on.
- Cable, metal and wood railings. Built to code and tensioned to pass inspection, all work guaranteed.
- Permits handled. Eric pulls all permits himself and schedules every inspection.
- You talk to the owner. Eric Bubniak is your point of contact from the first visit to the final walkthrough.
- The same crew every time. Three full-time builders who have worked together for over a decade, with 5-star reviews on Thumbtack.
Deck railing FAQs
How tall does deck railing have to be in Georgia?
Under the residential code used in Georgia, a deck more than 30 inches above the ground needs a guard at least 36 inches tall, with openings small enough that a 4-inch ball can't pass through. Stair handrails are usually 34 to 38 inches high, measured from the nose of the treads. Posts and rails also have to resist a 200-pound load at the top.
Is cable railing legal in Hall County?
Cable railing is allowed when it meets the same rules as any guard: at least 36 inches tall, strong enough, and tight enough that a 4-inch sphere can't push through the cables. That means stiff posts no more than about 4 to 5 feet apart, cables every 3 inches or so, and proper tensioning. We build cable railing to pass inspection.
Can I replace just the railing and keep my deck?
Often, yes. If the posts, joists, beams and the ledger attached to the house are solid, new railing can go on the existing frame. If the railing posts are rotted at the base or were notched and bolted weakly, we replace or reinforce the posts first. If the frame itself is failing, see our guide to repairing or replacing a deck.
How long does deck railing replacement take?
Most wood, composite and aluminum railings take 1 to 3 days on site. Cable railing usually takes 2 to 5 days because posts are drilled and cables are tensioned one by one. Ordering cable, aluminum or glass systems can add 1 to 3 weeks before the work starts.
Which deck railing lasts the longest?
Aluminum, stainless steel cable and glass need the least upkeep and can last 25 years or more. Composite railing lasts about 20 to 25 years with only washing. Pressure-treated wood lasts about 10 to 15 years in our humid Georgia climate and needs stain or paint every 2 to 3 years.
Do I need a permit to replace deck railing?
Replacing railing on an existing deck with the same type is often treated as a repair, but rebuilding posts, changing the stairs or building a new deck usually needs a permit in Gainesville and Hall County. Eric Bubniak checks and pulls any permit himself.
Who replaces deck railings in Gainesville, GA?
EBD Construction LLC, owned by Eric Bubniak, builds cedar and pressure-treated decks and installs cable, metal and wood railings in Gainesville, Hall County and around Lake Lanier, with the same three-person crew on every job. References are available on request.
Ready for new railing?
Call Eric Bubniak at 404-925-7481 or fill out the form below. Tell us roughly how many feet of railing you have and the look you want, and we'll set up a free consultation and a written estimate. For whole new decks and porches, see our deck and porch guide.
Get your free consultation
Tell us a little about your project. Eric will call you within one business day to talk it through and set up a time to see the space.
